Large Boiling Dryer

Large Boiling Dryer

Product description

Large-scale boiling dryer is also called flat bed. It consists of air filter, heater, fluidized bed host, feeder, cyclone separator, bag filter, high-pressure centrifugal fan and operating table. Due to the difference in the nature of raw materials, actual needs should be considered when equipping dust removal equipment.

Usually, you can choose one of cyclone separator and bag filter. Generally speaking, Sedona separators are only used for heavier raw materials. For powder and small particle materials, a bag filter is required. Gravity is very light. At the same time, there is an air supply device and a belt conveyor for removal.

At the same time, there is an air supply device and a belt conveyor. The separated granular solid raw material is fed into the fluidized bed dryer through the feeder. The filtered and heated fresh air is sent to the bottom of the fluidized bed by a fan and contacts the solid raw materials on the distribution plate. In this way, a fluidized state is formed and heat exchange between air and solids is performed.

干原料是outl退出et, and the wasted gas is discharged from the top of the fluidized bed, where it flows through the cyclone separator and the bag filter to collect the solid powder.

main features

The dean and hot air enter the fluidized bed through the distributor of the valve plate. Moistened raw materials supplied by hot air from the feeder in a boiling state. Due to the extensive contact between hot air and raw materials, it takes a lot of time. Air enters the front of the bed, boils in the bed for a few minutes, and then floats from the other beds. The machine deserves negative pressure.

sketch of folw char for production line of drinking agent

main parameter

Technical Parametefs	XF0.25-1 (XF10)	XF0.25-2 (XF20)	XF0.25-3 (XF30)	XF0.25-6	XFO.3-2	XFO.3-4	XFO.3-6	XFO.3-8	XF0.3-10	XFO.4-4	XFO.4-6
area of bed	0*26	0*6	1.0	1.5	0.6		1.8	2.4	3.0	1.6	2.4
drying capadty(kg/h)	10-15	20-25	3(M6	52-75	30	42-60	ea-90	84-120	106-160	56-80	84-120
power of fan(kw>	5.5	7.5	15	22	7.5	18.5	30	37	48	30	37
Inlet air temperature(t)	120-140	120-140	120-140	120-140	120-140	120-140	120-140	120-140	120-140	120-140	120-140
Material temperatureft;)	40-60	40-60	40-60	40~«0	40-60	40-60	40~€0	40-60	40-60	40-60	40-60
ovecal dimension(main macttte) L x W x H (m)	1x0.6x3.35	2x0.6x3.35	4x0.6x3.35	6x0.6x3.35	2x0.7x3.4	4x0.7x3.4	6X0.7X3.4	8X0.7X3.4	10x0.7x3.4	4x1x3.58	6x1x3.58
oocupled area (m4)	18	25	35	40	25	38	45	56	70	18	56
Technical Parameters	XF0.4-6	XF0.4-10	XFO.4-12	XFO.5-4 («XF50)	XFO.5-6	XFO.5-8	XF0.S-10	XFO.5-12	XFO.5-14	XFO.5-16	XFO.5-18
area of bedlam2)	3_2	4.0	4.8	2.0	3.0	4.0	5.0	6.0	7Xi	8.0	9.0
drying capadty(kg/h)	112-160	140-200	168-240	70-100	105-150	140-200	175-250	210-300	245-350	280-400	315-460
power of fan(kw>	48	70	70	30	48	70	105	140	147	169	197
Inlet air temperatureOC)	120-140	120-140	120-140	120*140	120-140	120-140	120-140	120-140	120-140	120-140	120-140
Material temperature(t^	40-60	40-60	40-60	40-60	40-60	40-60	40-60	40-60	40-60	40-60	40-60
overal sizw L x W x H (m)	8x1x3*58	10x1x3^8	12x1x3*68	4x1.2x4.1	6x1 *2x4.1	8x12x4.1	10x1*2x4.1	12x12x4.1	14x1*2x4.1	16x1*2x4.1	18x1 ^x4.1
occupied area (m2)	74	82	96	50	70	82	100	140	180	225	268