Chinese Factory Semi-Auto Capsule Filling Machine

Being one of the reputed organizations operating in this domain, we are engaged in manufacturing, wholesaling, dealing and supplying a quality range ofcontrol machine of capsule filling machine,weighing filling machine,pot filling machine. Common improvement is the pursuit goal of employees and the company's common development. Relying on years of R&D experience and management concepts, our company continuously introduces and absorbs advanced production technology and efficient management abroad.

Automatic Capsule Filling Machine

Product Description of Capsule Filling Machine

The capsule filling machine can perform the following actions at the same time: capsule feeding, capsule separation, powder filling, capsule rejection, capsule locking, completed capsule discharge

and die hole cleaning. It is the most ideal hard capsule filling equipment in the pharmaceutical and health food industries.

Working Principle of Capsule Filling Machine

The working principle of the automatic capsule filling machine is divided into two parts, which are the movement of the capsule and the filling of the medicine:

1. Movement of the capsule

During the filling process of the intermittent capsule filling machine, the movement of the capsule depends on the indexing box for intermittent and discontinuous rotation. The filling volume of the

capsule is mainly determined by the volume of the metering disc hole. The hollow capsule is in the capsule hopper, the main board moves up and down, the capsule enters the capsule guide groove by

its own gravity, and then the horizontal fork and the vertical plug are used to make the capsule cap upward and the capsule body downward into the upper and lower modules. The capsule body and

capsule cap are separated under the action of the device, and then the module enters the powder filling station.

2. Drug filling

The sensor in the powder holding ring controls the screw feeding rod above it, and the medicine is continuously added to make the height of the powder in the powder holding ring constant. position,

push the drug column into the capsule body. After that, it enters into the capsule rejection, capsule locking, finished capsule discharge, and module cleaning stations in turn, and then enters a new round of station cycle, and the cycle begins again and again.

Characteristics of Capsule Filling Machine

1. The automatic hard capsule filling equipment with intermittent action and hole-disk filling is fully enclosed at the filling and turning parts, which is convenient for cleaning;

2. The upper and lower modules of the capsule filling machine move in one direction, and the imported double-lip polyurethane sealing ring has good sealing performance;

3.胶囊填充的模块清洗站ing machine is combined with air blowing and inhalation, and the die hole is operated at high speed without dust;

4. The locking station of the capsule filling machine is equipped with powder suction equipment;

5. The capsule filling station of the capsule filling machine is equipped with a capsule ring, and there is no dust flying.

Product Show of Capsule Filling Machine

Parameter of Capsule Filling Machine

Model:	SED-600JC
Capacity:	600capsules/minute
Machine suitable for:	capsule Size #00 to 5
Power supply:	415v 50Hz three phase (it can be changed depend on your requirement)
Power consume:	5.5
Quantity of mould bores:	5pcs
Noise standard:	﹤75dB(A)
Weight:	800kgs
Overall dimension:	930×790×1950mm mm

Application of Capsule Filling Machine

Over the years, we have always been engaged in the manufacture of Chinese Factory Semi-Auto Capsule Filling Machine with an attitude of learning and a vision of development. Our company expresses sincere respect and gratitude for the inquiries from various manufacturers to make continuous efforts to improve, closely cooperate with customer needs, and create a better future! Welcome friends from all walks of life to visit, guide and negotiate business.