自动封盖机也称为“自动盖板和盖上机器”和“塑料封盖机”，主要用于瓶装液体填充和封盖或封盖和封盖机的过程。
自动封盖机的工作原理：盖子储存在较低料斗中，并通过变频提升带传递到封端开口。封端功能由两个同步夹紧带和三组六个覆盖轮实现，并且通过机械扭矩调节覆盖功能。功能，使封盖恰到好处。
The working principle and flow of the fully automatic capping machine:
1. Unscramble bottles, use a rotary unscrambler to neatly lay out the messy empty bottles and send them to the conveyor belt until the empty bottles are blocked by the chuck under the filling head.
2. Filling by the plunger pump. After the filling is completed, the chuck takes away the filled bottles and blocks the empty bottles at the same time.
3. After the filling is completed, the bottle is sent to the stopper capping chuck station and we see it after entering the station chuck.
4.操纵器吸收内部插头并将其压入瓶嘴。在这里，朋友可能需要问“内部插头是如何来自的？”我们可以看到大型振动板将逐一堆叠内部插头。送入滑槽的机器人采取和使用。
5. When the bottle passes the lid-hanging head, the lid is hung. The same lid is also sorted by a vibrating plate and sent into the slideway and finally slides into the lid-hanging head. Next, let’s look at the lock part.
6. After hanging the cap, the capping hammer presses the cap to the bottom. The cap-locking head uses the claw knife to roll the cap and the bottle body into one. The whole process is like this. Although the products may be different, it is basically the working principle of this capping machine.
7. The automatic capping machine can not only fill liquids, but also small bottles of liquids such as injections, disinfectants, various oral liquids, essential oils, cod liver oil, etc., can be filled and locked.
全自动封盖机的四个速度调节电机分别用于封盖，瓶夹紧，输送和封盖。该机具有高自动化程度，稳定性好，调整方便。更换瓶子形状或帽时，不需要备件。只是进行调整。它可以完成（如果配备有喂料机，盖子可以自动送到振动板）。
